MF 01 ER

About this product

Milled Fibre

3B Milled Fibre are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings and adhesives within a large range of applications and markets. MF 01 ER represents a main improvement compared to minerals when aiming a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most commonly available milled fibres as it displays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

FEATURES - Using Milled Fibre will bring you... - Powder form

BENEFITS - Reduction of deformations, better dimensional stability and shrinkage control - Improved thermal properties - Flame retardant effect - Higher resistance to abrasion - Anti-crack effect in gel coating and paints - Viscosity increase - Good flowability and easy to blend into resin or liquid - Increased productivity - Excellent surface finishing

PACKAGING MF 01 ER is packed in specific 1,000kg polypropylene bags for optimal feeding. Bulk bags are of sufficient strength to insure adequate protection during transit and stores. The packaging stacking is not recommended.

STORAGE Storage in a cool and dry warehouse into their original packaging is formally recommended. Ideal storage conditions are a temperature between 15°C and 35°C and a relative humidity of 35% and 75%. Opened packages should be resealed to prevent contamination of the product or discard. If the following recommendations are followed, the glass fibre products should not undergo significant changes when stored for extended periods of time. If the product is not stored under these conditions, it is strongly recommended to condition it in the workshop for at least 24 hours before use.

Datasheet tables:

Chopped Strand 3B offers a broad portfolio of Chopped Strand glass fibres designed for the most demanding composite technologies, whether Thermoplastic or Thermoset based. Chopped strands 3B Chopped Strand products: made of corrosion resistant E-Glass 4mm-long glass fibre bundles agglomerated into a pellet-like shape physical properties of 3B’s chopped fibres are designed to withstand extruders' most stringent process parameters, thus ensuring an optimum productivity during compounding coated with a specific sizing compliant with the polymeric resin requiring reinforcement CHOPPED STRANDS FOR THERMOPLASTICS 3B has a large Chopped Strand product portfolio. Our Chopped Strand products are designed for compounding various thermoplastic materials. A choice of glass fibre filament diameters and sizings are available to better optimize mechanical performances of final composite parts. Chopped Strands with specific features and functionalities like neutral colour, food & water contact or glycol/hydrolysis resistance are also offered.