Dispense bank valve, DN 8, lime-repellent, stackable

About this product

2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC).

Valves of this design are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. Valve bodies can directly be connected. The valve seat is made of scale build up inhibiting PTFE.

This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used.

Electrical operating safety is achieved by PBT coating of the coil and can be supported by an additional protection circuit.

The valve is available in two body types made of PSU and is distinguished primarily by its food grade and hot water capability.

Applications: - Hot / cold drink dispensers - Tank or boiler draining - automatic animal feeding equipment

Characteristics: - Direct acting - internal plunger assembly medium separated - valve bodies can be connected - PTFE valve seat to inhibit scale build up - Long term performance capability - flow rate adjustable (flow regulation screw) - Suitable for food and hot water appliances - No minimal pressure required - Similar hydraulic performance for AC or DC types - other hydraulic connections on request - complete drainage of valve outlet after shut off - Easy to assemble and service - coil change without opening of medium circuit - High operating safety through the use of high quality materials and 100% final testing of the products

Technical data

Materials

Data sheet (PDF): https://www.akmueller.de/fileadmin/akmueller/products_import/datasheets/46_008_x17_en.pdf