Chloride® Delta 600

About this product

Chloride® Delta family of rectifiers are designed to be installed in a cabinet or switchboard.

In an enclosure

In a panel to form UPS

Monitoring

Signalling or control circuits

To supply power to inrush systems such as relays, coils and solenoids

In order to check that the battery is capable of supplying the load, the module has a TEST function which lowers the voltage to 12 V, 24 V or 48 V depending on the module.

Although Delta chargers are pre-set for the most common batteries, it is possible to adjust the output voltage up to 125% of the nominal voltage using a potentiometer on the front panel.

To speed up the charging of batteries, it can be useful to apply a higher voltage for a few hours. Delta chargers have a boost function that increases the charging voltage by 3.8%. It is activated by connecting two terminals of a connector.

The Delta chargers can be voltage-controlled by an external potentiometer over a range of 10 to 15 V for 12 V, 10 to 30 V for 24 V and 15 to 60 V for 48 V. From 10 to 15 V, for 24 V from 10 to 30 V and for 48 V from 15 to 60 V.

The state of the charger is signalled by 2 LEDs and a dry contact for fault synthesis.