ARGOSEC CAL ALBAICÍN

About this product

ARGOSEC® CAL ALBAICÍN is a rendering mortar based on aerial lime (UNE EN 459) and white Portland cement, selected aggregates and organic additives that give it an extraordinary workability and adherence for on-site application.

Treatment of rising damp in walls.

Excellent workability.

A strong whiteness with no yellowing.

Waterproofed

Waterproof to rain water.

Permeable to water vapour.

Projectable.

Thixotropic.

The rendering of the walls will be carried out with dry mortar ARGOSEC® CAL ALBAICÍN, from the company DANOSA, class GP CSIII according to the UNE EN 998-1 standard. The substrate must be sound, clean, free of friable parts, completely hardened and have finished its time of dimensional variation. The construction joints shall be respected.

Mortar renderings.

Brick or ceramic block factory.

Concrete (treated with a bonding bridge).

In case of heat, wind or on very absorbent substrates, it is advisable to dampen the substrate and wait for the water film to disappear.

Do not apply on plasters or paints.

The support must be healthy, clean, flat, free of paint, crumbling or poorly adhered parts, release agents, etc. and in general without any substance or particle that may prevent correct adherence.

Mix ARGOSEC® CAL ALBAICÍN with 5.25 L of clean water per 25 kg bag manually or mechanically until a homogeneous, creamy, lump-free mixture is obtained.

It can be applied to the substrate by machine or by hand, spread with a ruler, trowel and smooth or trowelled finish as required.

Suitable for application in one coat or as a base coat and top coat.

Store in a dry place, protected from rain, sun, high and low temperatures.

It is advisable to mesh the application at singular points.

When applied at very high relative dampness, drying may be delayed.

In case of splashes in the eyes, rinse with plenty of water and seek medical attention if necessary. For more detailed information see safety data sheet.

Do not apply when there is a risk of rain or frost.

Do not add more water once it has started to set.

Comply with the mixing water.

On very porous substrates prime with DANOPRIMER® RPU.

Please see product safety datasheet for further information.

Shelf life of 12 months.

Packed in multi-leaf paper bags with damp-proof sheets that allow for its proper storage for 12 months in its original sealed packaging, safe from dampness.

Consult the safety data sheet.