DANOPOL WALKWAY

About this product

Flexible 1.5 mm thick PVC sheet reinforced with synthetic polyester fiber and featuring a non-slip surface, designed to be welded onto the main waterproofing membrane, creating technical walkways on roofs.

Used as a technical access corridor to the roof, for refurbishment work or for checking installations in exposed sheet metal roofing systems.

Compatible with all synthetic sheets in the DANOPOL® range.

It has a non-slip finish.

Allows technical access to the roof.

Provides highly reliable welding and tapping.

Protects waterproofing.

Lay the aisle on the deck and allow it to lay flat, maintaining a distance of 15 cm between rolls.

The rolls must be arranged in such a way that they allow for proper drainage through the slopes of the roof.

Each piece shall be welded (longitudinally and transversally) by means of hot air and pressure to the waterproofing sheet, either by manual and/or mechanical means, achieving a weld of at least 4 cm thickness.

In renovation projects on old waterproofing, it may be necessary to remove existing materials or to use suitable separating layers.

The weldability and quality of the weld depend on atmospheric conditions (temperature, dampness), welding conditions (temperature, speed, pressure, pre-cleaning) and on the surface condition of the membrane (cleanliness, dampness). Therefore, the hot air machine must be adjusted to obtain a correct assembly.

After the surface has cooled down, the welds shall be carefully checked by means of a punch. If any irregularity is detected in a hot air weld, it shall be reworked with the same procedure as described above.

Appropriate safety measures must be taken as welding work can give off fumes which can be irritating.

The product must be stored in a dry place protected from rain, sun, heat and low temperatures.

This product is not toxic or flammable.

Easy to cut to adapt the dimensions to the work.

No welding work should be carried out when the ambient temperature is lower than -5ºC for hot air welding.

It shall be kept in its original packaging, in a horizontal position and all rolls parallel (never crossed), on a flat and smooth support.

In all cases, the Occupational Safety and Hygiene standards, as well as the standards of good construction practice, must be taken into account.