DANOTHERM EPS BOARD

About this product

Stabilized and self-extinguishing expanded polystyrene thermal insulation panel, with straight-cut perimeter joints, used in the DANOTHERM SATE system.

Thermal insulation for exterior, ETICS facades.

Thermal insulation in buildings.

Long-term low leverl of water absorption.

High long-term compressive strength.

Adequate vapour diffusion resistance factor to ensure "breatheability" while avoiding the risk of interstitial condensation.

Easy and safe handling of the irons: they are light, do not irritate the skin, do not release dust, maintain their physical integrity.

Have a durability equal to the useful life of the building in which they are incorporated.

Rough surface, which facilitates adherence of coatings.

Check the continuity of the insulation, avoiding thermal bridges such as: outline of openings, perforations, perimeters, parapets, slabs, pillars, etc.

Check for CE marking and Declaration of Performance.

Check that the thermal insulation is as specified in the project.

Check that the product has arrived on site in its original packaging, duly labelled and in perfect condition.

Check that the installation corresponds to the project definition, in particular the order of the layers of each enclosure and the correct position of the insulation layer in relation to the others.

Check compliance with the project specifications in terms of dimensions, thickness, declared thermal conductivity, declared thermal resistance and reaction to fire.

It is necessary to keep the plates away from sources of heat or flames. They contain a flammability retarding additive to inhibit accidental ignition from a small fire source, but plates are combustible and can burn quickly if exposed to intense fire. All fire classifications are based on small-scale tests and may not reflect the reaction of the material under actual fire conditions.

Do not expose to temperatures above 75ºC.

Protect from direct sunlight during long-term storage.