NEXALON COLAMINATED PROFILE A

About this product

Colaminated sheet profile with TPO, used as a waterproofing termination on both the horizontal plane and the vertical wall.

Used to finish the waterproofing both horizontally and vertically. The fixing of the laminated profile to the wall may vary depending on the characteristics of the substrate.

Compatible with all synthetic sheets in the NEXALON TPO range.

Facilitates the finishing of the membrane both in the fixation to the horizontal plane and to the vertical wall.

Provides highly reliable welding and tapping.

Solves the connection both in perimeter anchors and in vertical walls safely.

The surface of the base substrate must be resistant, uniform, smooth, clean, dry and free of foreign bodies.

It is fixed to the substrate by means of mechanical fasteners spaced approximately 20 cm apart at the most.

The sheets of the NEXALON TPO range are welded to the colaminated metal sheet by means of hot air, resulting in a highly reliable weld and finish.

The product must be stored in a dry place protected from rain, sun, heat and low temperatures.

This product is not toxic or flammable.

Easy to cut to adapt the dimensions to the work.

No welding work should be carried out when the ambient temperature is lower than -5ºC for hot air welding, nor lower than + 5ºC for welding with Adhesives.

It shall be kept in its original packaging, in a horizontal position and all rolls parallel (never crossed), on a flat and smooth support.

The presence of moisture may cause whitish stains (white rust) that could compromise the adhesion of the polyurethane and lead to deterioration of the coating.

The sheets and coils must be processed within 6 months after shipment, using the most suitable equipment to avoid abrasions on the coating surface or cracks.