NEXALON CORNER INTERNAL

About this product

A prefabricated internal TPO corner for interior roof angles. Hot air welded.

Used as a complement to TPO sheet waterproofing, to guarantee watertight protection in interior corners of roofs.

Good adaptability to any irregularities of the substrate.

Compatible with all synthetic sheets in the NEXALON TPO range.

Facilitates the finishing of the membrane at interior corners.

Great elasticity.

Provides highly reliable welding and tapping.

Solves the connection at interior angles easily and safely.

The surface of the base substrate shall be strong, even, smooth, clean, dry and free of foreign bodies.

The corner welding of the corner to the membrane shall be carried out by means of a hot air machine.

The product must be stored in a dry place protected from rain, sun, heat and low temperatures.

This product is not toxic or flammable.

Easy to cut to adapt the dimensions to the work.

No welding work should be carried out when the ambient temperature is lower than -5ºC for hot air welding, nor lower than + 5ºC for welding with Adhesives.

It shall be kept in its original packaging, in a horizontal position and all rolls parallel (never crossed), on a flat and smooth support.

Danosa recommends consulting the safety data sheet for this product, which is permanently available at www.danosa.com, Knowlegde Portal, or it can be requested from our Technical Department.

In all cases, the Occupational Safety and Hygiene standards, as well as the standards of good construction practice, must be taken into account.