REVESTIDAN PROTECT MAX COOL ROOFING

About this product

Waterproofing liquid membrane, in aqueous dispersion, of polyurethane acrylic hybrid technology that, once dry, forms an elastic, waterproof and UV-resistant film. Versatile product, suitable for waterproofing and protective coating, ultra-reflective in white to improve insulation capacity (SRI 106 on concrete and SRI 102 on bituminous membrane). Provides excellent anti-carbonation properties.

Waterproofing of non-accessible roofs that can be visited occasionally and for maintenance purposes.

Re-waterproofing of roofs with self-protected asphalt sheets (aluminium or slate).

Waterproofing of concrete, mortar or metal supports.

Rewaterproofing of metal roofs.

Protection of concrete structures against carbonation.

High elasticity for effective crack bridging.

Low water absorption.

Low adhesion of dirt.

Compatible with asphalt sheets in roof renovation.

Outstanding Adhesion

Easy application.

Continuous seamless waterproof membrane.

Ultra-reflective protection in white (SRI 106 on concrete and SRI 102 on bituminous membrane, according to ASTM E 1980).

UV resistant.

Resistant to occasional traffic. Accessible.

Excellent anti-carbonation properties.

Steel.

Aluminium.

Tiles.

Polyurethane foam.

Asbestos cement

Concrete.

Mortar.

Metal.

Asphalt sheets.

Zinc.

Waterproofing paint for finishing roofs on vertical elements: Apply the product before use, shake the product until it is perfectly homogenised. Apply a coat of primer, by brush or wool roller, diluting REVESTIDAN® PROTECT MAX COOL ROOFING in the proportion of 3 parts by volume of the product to 1 part water, making sure that it penetrates well into all cracks or fissures. Once the primer is dry, apply successive coats of undiluted REVESTIDAN® PROTECT MAX COOL ROOFING until a coverage of 2.0 kg/m² without primer is achieved (minimum 2 coats without primer). Do not apply a coat until the previous coat is completely dry. Cure by evaporation of water within 24 hours at 20-25 °C and 50 % relative humidity. Dry to touch time approximately 4 hours at normal temperature and relative humidity. Drying time between coats, approximately 8 hours at normal temperature and relative humidity. It may be necessary to reinforce the singular points with a synthetic fabric reinforcement.

Clean tools with water right after finishing. If there is solid dirt, we recommend scraping it off.

Do not rest sharp or heavy objects on top of it.

Do not use in places in permanent contact with water, either through condensation, storage or waterlogging.

Waterproofing work must not be carried out when weather conditions may be detrimental, in particular in situations of snow, ice, rain or strong wind.

Constant or prolonged immersion is not recommended.

Not valid for waterproofing buried walls. In these cases we recommend DANOCRET® Protect Flex.

It should never be used as a waterproofing system to be subsequently protected with heavy protection, whether slabs, gravel or earth (in the case of landscaped roofs) or otherwise.

We recommend the application of a DANOPRIMER® W primer depending on the substrate.

Storage stability in closed original container and keep the product between 5 °C and 30 °C for a maximum period of 24 months.