
REVESTIDAN SATE MINERAL
Plastering mortar based on white cement, polymeric resins, selected aggregates and chemical additives that give it an extraordinary performance for decorative finishes as a finishing coating for SATE systems.; Execution of facade cladding…
About this product
Plastering mortar based on white cement, polymeric resins, selected aggregates and chemical additives that give it an extraordinary performance for decorative finishes as a finishing coating for SATE systems.
Execution of facade cladding suitable for different finishes or textures.
Plastering and thin-layer plastering on SATE system.
Renovation of facades.
Manual or mechanical application
Has the ability to re-form its shape.
High mechanical performance.
Extraordinary smoothness
A strong whiteness with no yellowing.
Waterproofed
Controlled shrinkage
Without off-hook.
Thixotropic.
(On concrete and other super-absorbent or non-absorbent substrates, apply a suitable primer).
ETICs system.
Cement-based substrates.
The substrate shall be sound, clean, free of friable parts, fully hardened and have completed its time of dimensional variation.
The substrate must have a surface of adequate porosity and roughness.
Mix manually or mechanically until a homogeneous, creamy and lump-free mixture is obtained.
Spread the mortar, leaving an average thickness of 2-4 mm, and smooth the applied material to regularise the thickness and smooth the surface.
It is advisable to mesh the application at singular points.
Equipment and tools are easily cleaned with water before the mortar has hardened.
Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
Do not apply on plaster supports.
Do not apply to plastic, wood, rubber, etc. surfaces.
Do not re-mix.
Comply with the mixing water.
Apply elastic and breathable paint as protection.
The product is subject to rigorous quality control and strict validation parameters. Even so, slight color variations may be observed between different production batches, which is why it is recommended to always apply the same batch of product on a façade. Applying material from different production batches on the same façade may result in slight color differences.
Packed in multi-leaf paper bags with damp-proof sheets that allow for its proper storage for 12 months in its original sealed packaging, safe from dampness.
1 specification table for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
4 certificates on file for Danosa Group Sa
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificatesDanosa Group Sa
- Location
- Spain
- US shipments
- 3 to 3 buyers since Jan 4, 2026
Contact the supplier
What are you looking for from Danosa Group Sa?
Prefer a form? Submit an RFQ