Filtro Pac R – Reverse Flow Pocket Filter

About this product

Filtro Pac R filters are medium-efficiency extended surface pocket (bag) filters, specifically engineered for reverse flow configuration. The media is made from superior fine synthetic fibers (Polyester). These filters feature internal rod separators that stabilize the pockets during reverse air flow operation. Filtro Pac R serves as an ideal alternative to panel filters of equivalent efficiency, offering a significantly larger media area than conventional panel filters. When the Filtro Pac R combined with direct flow filters like Filtro Pac P or Filtro Cell VGT, these combinations enhance overall system performance by providing high dust-holding capacity and reduced pressure drop. The progressive density multi-layered fiber arrangement ensures exceptional filtration eficiency and high dust holding capacity. Key Features · Reverse Flow Configuration · Rod separator for pocket stability · Low pressure drop · Long service life · High frequency welded pockets · High burst strength · Easy installation · High dust holding capacity · Filter Standard ASHRAE 52.2 / EN 779 / ISO 16890 Frame Type Jointless plastic Standard Header Size 20 -25mm Media Self Supporting Synthetic Media · Efficiency G4 to F9 / MERV 8 to MERV 15 / ISO Coarse 70% / ePM 10 50% to ePM 1 85% Max. Operating Temperature 75°C / 167ºF · Final Pressure Drop 250 Pa / 1" WG Gasket Single piece PU foam Filtro Pac R filters are well-suited for air intake applications in gas turbines, diesel generators, automotive paint booths, powder coating systems, and other surface treatment facilities Construction Filtro Pac R pocket filters are made up of superior grade synthetic fiber media, multi-layered with a progressive density fiber arrangement. This results in high dust holding capacity with low pressure drop. The rigid pockets are formed by welded construction and aerodynamic design. The pockets are mechanically fastened to an ABS frame, ensuring 100% leak-proof operation. Additionally, rod separators are installed inside the filter pockets to provide structural support, This design minimizes pressure drop and ensures the pockets remain stable under conditions like turbulence or high burst pressures. These filters can operate well in 100% humid conditions and in salt-laden environments. Note: Other size having filter face size 20x24" operates at 80% air volume and filter face 12x24" operates at 50% of air volume of 24x24". Pressure drop remains the same. Available upon request: Additional media efficiency