The string of drill pipes is raised and lowered by means of the drill line. This operation requires a rope construction with maximum resistance to abrasion and crushing on the multi-layered drum. The recommended ropes are 6x19/IWRC EIPS…
🔒 1 specification tables, full-resolution photos and certificates are available to signed-in buyers.
The string of drill pipes is raised and lowered by means of the drill line. This operation requires a rope construction with maximum resistance to abrasion and crushing on the multi-layered drum. The recommended ropes are 6x19/IWRC EIPS grade, right regular lay, ungalvanised or 6x26/IWRC EEIPS. The 9 larger outer wires in the 6x19 construction provide resistance to abrasion, while the IWRC enhances crushing resistance as well as contributing towards the rope breaking force. The right hand regular lay reduces the tendency of the rope to build up torque during the operation. 6x26/IWRC UHP ropes with 10 large outer wires have proved a major success in rotary drilling applications.
Rope made of steel wires twisted into strands, laid around a core, for lifting, hauling and rigging.
1 specification table for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
13 certificates on file for Haggie Steel Wire Rope
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificates
High strength, robust ropes used on drum and friction winders. Its uniquely triangular shape reduces sheave and liner wear whilst protecting the individual wire from excessive point loading.; J39 (page 8 titled 6x32 (14/12/6Δ)/F), J40…
Koepe ropes are used on Koepe winders that work with traction sheaves. It is a system where the winding drum is replaced by a large wheel or sheave. Both cages are connected to the same rope, which passes around some 180 degrees of the…
It guides the skips as it goes up and down the shafts. There is one construction, a half locked coil rope and seven different diameters but not limited to that.
Download the datasheet to see the estimated mass (kg/m) of the S25 construction that we would normally recommend.
Low rotating multi-strand ropes used to aid removal of rock via a kibble hoist during shaft sinking.; It has to be strong and corrosion resistant. Mostly, its mode of failure and discard is due to wear, fatigue and bending stresses.; From…
“Fishback” Non-Spin Stage Ropes 15 Strand non-spin 9x10(8/2)/6x14(8/6Δ)/WMC; Ultra High Tensile “Fishback” Non-Spin Stage Ropes 15 Strand “Fishback” non-spin 9x10(8/2)/6x14(8/6Δ)/WMC; Ultra High Tensile “Fishback” Non-Spin Stage Ropes 18…
For many years we have produced standard 8-strand drag and hoist ropes for the draglines, which performed well under so many variable operating conditions.; In comparison with the 6-strand type, this rope construction is more flexible, has…
The 70mm (24.95 kg/m) shovel rope is proudly used by well-known mines such as Kumba Iron Ore, Seriti coal, Anglo American, Foskor and Anglo Platinum.; The 50-64mm shovel rope was born from the D01. It is fully plasticated to keep out the…