Preview images. Sign in for full-resolution photos.
Couplings----; couplings，flexible couplings，HRC couplings，NM couplings，MH couplings，Pin; coupling，Spacer Coupling，Flange Coupling，Sleeve Coupling,nylon sleeve coupling.; Shaft coupling design No. 001 - material steel; ● Hubs from steel,…
🔒 full-resolution photos and certificates are available to signed-in buyers.
Couplings---- couplings，flexible couplings，HRC couplings，NM couplings，MH couplings，Pin coupling，Spacer Coupling，Flange Coupling，Sleeve Coupling,nylon sleeve coupling. Shaft coupling design No. 001 - material steel ● Hubs from steel, specifically suitable for drive elements subject to high loads, e. g. steel mills, elevator drives, spline hubs, etc.) ● Torsionally flexible, maintenance-free, vibration-damping ● Axial plug-in, fail-safe ● Allover machining - good dynamic properties ● Compact design/small flywheel effect ● Finish bore according to ISO fit H7, feather keyway according to DIN 6885 ( JS9) ● Approved according to EC Standard 94/9/EC Components 19, 28 and 42 – hub material X10CrNiS 18-9 material number 1.4305 (V2A) DIN 17440 24, 38 and 48 – hub material X6CrNiMoTi17-12-2 material number 1.4571 (V4A) DIN 17440 19 – 48 from stainless steel available from stock If no material is mentioned in the order, the calculation/order is based on the material marked with 1) Maximum torque of the coupling TKmax. = rated torque of the coupling TK Nenn. x 2 Shaft coupling design No. 001 - casted materials ● Torsionally flexible, maintenance-free ● Damping vibrations ● Allover machining – good dynamic properties feather keyway according to DIN 6885 ( JS9） (without aluminium AL-D) 1) Maximum torque of the coupling TKmax. = rated torque of the coupling TK Nenn. x 2 2) Material Al-H. Double cardanic type DKM ● For high shaft displacements ● 3-part double-cardanic ● Reduced vibration and noise ● The restoring forces resulting from displacements are very low ● Increase of the total lifetime of all adjacent components (bearings, seals etc.) (Explosion Certificate ATEX 95) ● Double-cardanic design without the need for bearing support or external guarding Finish bore according to ISO fit H7, feather keyway according to DIN 6885 （JS9） Further types: ZS-DKM1 For detailed information please ask for our total data sheet no. M 369832.
Products in these catalogues that belong to none of the families above.
Full specifications for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
5 certificates on file for Hongkong Chinabase Intl Group Ltd
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificates
Roller Chains Guide Catalog; In addition, we also offer OEM products – simply send us a drawing or sample and we'll provide you with a free quotation.>>; CKG; CKGH; CKGV; K; E&EU; CE; T; CT; CF; CK; U; CU; T2; CT2; E2; CE2; T3; CT3; UU;…
Round Link Chains Guide Catalog; These tpye guides are used for round link chains.; In addition, we also offer OEM products – simply send us a drawing or sample and we'll provide you with a free quotation.>>; R; CR; CRG; CRO; Chain guides…
Belt guides catalog; Application: Guide for V-belts, round belts, flat belts, toothed belts, and synchronous belts.; Function: They offer wear-reducing and maintenance-free operation for drives and conveyors & conveyor belt guides.; In…
Metallic profile for guides; Note: These C profiles can be screw-fixed or welded. All dimensions given in mm.
worm gear speed reducer; WJ series worm-gear speed reducer; 1.Brief introduction; 2.Type and selecting for use; 3.Structure graphic presentation of appearance; 4.Performance parameter; Brief introduction; WJ series worm-gear speed reducer…
1.Model & mark; 2.Mounting positions; 3.Chart; 4.Date table; 5.Size chart & dimensions of NMRV-NRV; 6.Size chart of NMRV-NRV 025; 7.Single/double extension output shaft; 8.Size of double extension worm shaft; 9.Sizes of torque arm;…
Combination worm gear units; 1.Model & mark; 2.Combined outline & installation size for NMRV/NMRV; 3.Performance parameter for NMRV/NMRV; 4.Installation direction drawing of NMRV/NMRV; 5.Position diagram for flange; Model & mark; Combined…
1.Model & mark; 2.Basic variator characteristic table; 3.Performance parameter for basicmodel & first gear speed reducer; 4.Touque curve drawing; 5.Basic model size table; 6.TXF installation direction drawing; 7.Model & mark of basic model…