Preview images. Sign in for full-resolution photos.
Can be used for personnel protection equipments.; PSA Fall Protection Anchorage Points are no lifting points in a conventional sense. They are used as anschorage points for personal fall protection systems (PSA) acc. to EN 363:2008. After…
🔒 4 specification tables, full-resolution photos and certificates are available to signed-in buyers.
Can be used for personnel protection equipments. PSA Fall Protection Anchorage Points are no lifting points in a conventional sense. They are used as anschorage points for personal fall protection systems (PSA) acc. to EN 363:2008. After installation, harnesses can be attached into them. These anschorage points can also be permanently installed, f.e. at a building to allow to attach fall arrest safety harnesses. These products are tested by a notified institution of DGUV (Deutsche Gesetzliche Unfallversicherung) with the evidence of the in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5 for lifting points required forces. They are corresponding to a “anchor point” according to European edict 2016/425 and the DIN 795:2012-10 resp. DIN CEN / TS 16415:2013-4 and they are marked with the number of load bearing persons (= 1 or 2 persons). Why choose RUD PSA anchorage points? - Maximum safety: Tested and certified by DGUV, compliant with international standards. - Flexible installation: Suitable for both permanent and temporary mounting. - Universal application: Available in metric thread sizes, UNC inch threads and weldable design. - Durable materials: Made of stainless steel or high-grade alloy steel, depending on the environmental conditions.
PSA INOX-STAR metric - WLL range 1 – 2 persons. - Ring body and bolt made from stainless steel. - Non-removable special bolt.
PSA STARPOINT metric thread metric - WLL range 1 – 2 persons. - Non-removable special bolt.
PSA-STARPOINT UNC thread UNC inch thread - WLL range 1 – 2 persons. - Non-removable special bolt.
PSA INOX-ABA weldable - WLL range 1 – 2 persons. - Closed and circumferential fillet weld thus no subcorrosion. - Made of Duplex Steel 1.4462.
Shackles, hooks, thimbles, clips, sockets, turnbuckles, swivels and other rope and chain fittings.
4 specification tables for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
4 certificates on file for Rud Ketten Rieger Und Dietz Gmbh Un
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificates
The suspension ring of a center pull hoist ring can easily get stuck in the worst case position when the load is lifted, resulting in a dangerous transverse load. These can damage or destroy the bolt. If the load then drops suddenly, this…
The first DNV-certified lifting point for underwater applications.; Certified according to DNV-ST-0377 and DNV-ST-0378; Approved for subsea use; Zinc flake coating for maximum corrosion resistance; 720 h salt spray test resistance; Captive…
The PowerPoint®-Collection is a universal solution for a boltable lifting point. The products are equipped with double ball bearings and thus also take over the rotatable WLL 90° to the bolt-on direction.; Variant PP-VIP:; A VIP-chain of…
The VWBG load ring with ball bearing allows vertical rotation under full load. Tipping and flipping actions are therefore possible and safe. Even loading 90° (rectangular) to the ring plane is possible. This load force occurs, for example,…
Load rings such as the VLBG-PLUS are characterised by their extremely low construction with a pivoting suspension ring and an eccentric force introduction. An important advantage: They automatically align themselves correctly in the…
VLBG Load ring, metric thread with 10.9-bolt; Proven and adjustable in the direction of force; WLL range 0.3 t – 4 t.; Captive but exchangeable 10.9 bolt.; The clamping spring achieves noise reduction and keeps the suspension ring in the…
The VRS-STARPOINT in octagonal shape aligns itself around the installed bolt into the load force direction. This excludes dangerous untightening (like rigid DIN-580 bolts). Thanks to high-strength quenched and tempered steels and ICE-Bolt,…
Swivel hoist ring metric - with internal thread; Rotatable lifting point with internal thread.; Rotatable 90° to the bolt-on direction under rated WLL.; Large claerence between the bolt-on surface and load to prevent damage.; Fast and…