Preview images. Sign in for full-resolution photos.
VLBS-Weld-on block; Large WLL range 1.5 t – 16 t.; Distance knobs on the weld-on block for the necessary distance for root welding.; Bracket and weld-on block for VLBS-U is captive due to the retaining spring.; Lashing ring; Large…
🔒 7 specification tables, full-resolution photos and certificates are available to signed-in buyers.
VLBS-Weld-on block - Large WLL range 1.5 t – 16 t. - Distance knobs on the weld-on block for the necessary distance for root welding. - Bracket and weld-on block for VLBS-U is captive due to the retaining spring.
Lashing ring - Large permissible tensile force range 3,000 daN – 32,000 daN. - Functionally optimised shape of the attachment eye for better support under lateral loads and protection of the clamping spring.
VRBS-FIX Weld-on block The welding blocks are forged out of the material 1.0577+N (St 52-3) and are marked with the identification number of the permissible nominal WLL. Welding should be carried out by a qualified person according to ISO 9606-1. The joint faces must be free from impurities like oil, colour etc. The chosen welding point must be suitable for the corresponding force introduction. The engaging surface must be plain. Given an uneven surface, the weld blocks have to be re-adjusted.
VRBK-FIX Weld-on block
VRBS Weld-on block
LRBS-FIX / LRBK-FIX Ring Octagonal lashing ring link. - Forged load ring according to EN 1677-1, - 100% electromagnetic crack detected, - phosphated. - Meets the requirements of the respective employer´s liability insurance association.
RUD-Bolts for L-VLBG-PLUS magnetically crack tested
Shackles, hooks, thimbles, clips, sockets, turnbuckles, swivels and other rope and chain fittings.
7 specification tables for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
4 certificates on file for Rud Ketten Rieger Und Dietz Gmbh Un
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificates
The suspension ring of a center pull hoist ring can easily get stuck in the worst case position when the load is lifted, resulting in a dangerous transverse load. These can damage or destroy the bolt. If the load then drops suddenly, this…
The first DNV-certified lifting point for underwater applications.; Certified according to DNV-ST-0377 and DNV-ST-0378; Approved for subsea use; Zinc flake coating for maximum corrosion resistance; 720 h salt spray test resistance; Captive…
The PowerPoint®-Collection is a universal solution for a boltable lifting point. The products are equipped with double ball bearings and thus also take over the rotatable WLL 90° to the bolt-on direction.; Variant PP-VIP:; A VIP-chain of…
The VWBG load ring with ball bearing allows vertical rotation under full load. Tipping and flipping actions are therefore possible and safe. Even loading 90° (rectangular) to the ring plane is possible. This load force occurs, for example,…
Load rings such as the VLBG-PLUS are characterised by their extremely low construction with a pivoting suspension ring and an eccentric force introduction. An important advantage: They automatically align themselves correctly in the…
VLBG Load ring, metric thread with 10.9-bolt; Proven and adjustable in the direction of force; WLL range 0.3 t – 4 t.; Captive but exchangeable 10.9 bolt.; The clamping spring achieves noise reduction and keeps the suspension ring in the…
The VRS-STARPOINT in octagonal shape aligns itself around the installed bolt into the load force direction. This excludes dangerous untightening (like rigid DIN-580 bolts). Thanks to high-strength quenched and tempered steels and ICE-Bolt,…
Swivel hoist ring metric - with internal thread; Rotatable lifting point with internal thread.; Rotatable 90° to the bolt-on direction under rated WLL.; Large claerence between the bolt-on surface and load to prevent damage.; Fast and…