Preview images. Sign in for full-resolution photos.
Large WLL range 4 t – 50 t.; Split force introduction thanks to multiple point fixing.; Suspension ring pivots 270°.; WLL possible up to 90° in load ring plane.; Thanks to the weld arrangement (circular fillet weld), no contact/crevice…
🔒 1 specification tables, full-resolution photos and certificates are available to signed-in buyers.
- Large WLL range 4 t – 50 t. - Split force introduction thanks to multiple point fixing. - Suspension ring pivots 270°. - WLL possible up to 90° in load ring plane. - Thanks to the weld arrangement (circular fillet weld), no contact/crevice corrosion can occur. - Wear markings for easy determination of wear. - The clamping spring achieves noise reduction and keeps the suspension ring in the desired direction. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Loadable on all sides: Lifting points which can be loaded in all conceivable directions or which automatically turn into the load direction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - DNV-approved. This product is suitable for marine and offshore applications. - The retaining spring holds the suspension link/suspension bracket in the adjusted position. This prevents rattling noise and simplifies painting. - The lifting point has a pivoting area in the suspension link of 270°. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction.
Shackles, hooks, thimbles, clips, sockets, turnbuckles, swivels and other rope and chain fittings.
1 specification table for this product
Sign in with a free buyer account to see the complete tables, every construction and grade.
4 certificates on file for Rud Ketten Rieger Und Dietz Gmbh Un
Sign in to see each certificate’s standard, issuing body, scope, validity and the certificate documents.
Sign in to view certificates
The suspension ring of a center pull hoist ring can easily get stuck in the worst case position when the load is lifted, resulting in a dangerous transverse load. These can damage or destroy the bolt. If the load then drops suddenly, this…
The first DNV-certified lifting point for underwater applications.; Certified according to DNV-ST-0377 and DNV-ST-0378; Approved for subsea use; Zinc flake coating for maximum corrosion resistance; 720 h salt spray test resistance; Captive…
The PowerPoint®-Collection is a universal solution for a boltable lifting point. The products are equipped with double ball bearings and thus also take over the rotatable WLL 90° to the bolt-on direction.; Variant PP-VIP:; A VIP-chain of…
The VWBG load ring with ball bearing allows vertical rotation under full load. Tipping and flipping actions are therefore possible and safe. Even loading 90° (rectangular) to the ring plane is possible. This load force occurs, for example,…
Load rings such as the VLBG-PLUS are characterised by their extremely low construction with a pivoting suspension ring and an eccentric force introduction. An important advantage: They automatically align themselves correctly in the…
VLBG Load ring, metric thread with 10.9-bolt; Proven and adjustable in the direction of force; WLL range 0.3 t – 4 t.; Captive but exchangeable 10.9 bolt.; The clamping spring achieves noise reduction and keeps the suspension ring in the…
The VRS-STARPOINT in octagonal shape aligns itself around the installed bolt into the load force direction. This excludes dangerous untightening (like rigid DIN-580 bolts). Thanks to high-strength quenched and tempered steels and ICE-Bolt,…
Swivel hoist ring metric - with internal thread; Rotatable lifting point with internal thread.; Rotatable 90° to the bolt-on direction under rated WLL.; Large claerence between the bolt-on surface and load to prevent damage.; Fast and…