No image in the catalogue

Gondola Rope

🔒 6 specification tables, full-resolution photos and certificates are available to signed-in buyers.

About this product

The construction of high-rise building, Chimneys, Towers, Bridges and Industrial structures has created a demand for "UNLIMITED HEIGHT, MOBILE CONTINUOUS ACCESS PLATFORMS". These are required for construction and maintenance of building, cleaning, painting, repairs and glass facade maintenance. These mobile continuous access platforms are commonly known as GONDOLAS. These platforms are raised and lowered "using hoisting motors that run on steel wire ropes that pass through the hoisting mechanism using pressure pulleys. The steel wire ropes used in it are called GONDOLA ROPES. These steel wire ropes are made using a special steel with tightly controlled specification having special zinc coating applied before wire drawing with improved adherence of coating, closer tolerances, improved fatigue property to provide longer rope life and consistent quality. LUBRICANT Unless otherwise specified, the Gondola ropes are dry with a view to avoid the adhesion of dust particles and slippage in rollers when in use in open-air atmosphere. MAINTENANCE Sheave and grooved rollers must be checked periodically for wear in the grooves, which may cause pinching, and abrasion of the rope. If the groove bears the imprint of the rope it should be machined clean or replaced with a sheave of harder material. STORAGE In order to avoid corrosion and damage, wire rope should be stored in a dry place, with adequate ventilation to avoid a build-up of moisture around rope. The stored rope must be covered with dust protecting covering. Avoid the rope contact with alkalis and acidic materials, otherwise the rope will get corroded at the point of contact. RECOMMENDATION Proper maintenance and care of rope ensures safety, longer life and lower costs, therefore: • Never over load the wire rope. • Never exceed the work load limit/safe working load. • Use correct design factor for the application. • Never use damaged, or corroded rope. • Never use broken, corroded, grooved sheaves. • Never fail in performing the periodical check for the maintenance of rope. • Do not use twisted, looped or kinked wire rope. • Avoid crushing or hammering, severe or reverse bending. • Avoid shock-too fast start or stop, as this may lead to bird caging of the rope. Powerform 6 Gondola Rope [6x19S, 6x17S] - Steel Core Conventional 6 Gondola Rope [6x19S, 6x19M, 6x17S]-Steel Core Powerform 5 Gondola Rope [5x26WS, 5x19S] Conventional 5 Gondola Rope [5x26WS, 5x19S] Powerform 4 Gondola Rope [4x36WS, 4x26WS, 4x19S] Conventional 4 Gondola Rope [4x36WS, 4x26WS, 4x19S]