Forged Steel Integral Flanged Valves

About this product

VITAS Forged steel Flanged End Valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in SS/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint. Integral Flanged End Valves are available in gate, globe, piston, check, and swing check design configurations. Integral Flanged End Valves Design Construction and Specifications VITAS Integral Flanged End Valves conform to API 602, MSS-SP-118 (as applicable), and ANSI B16.34. Each are tested according to API 598 and marking is per MSS SP-25. Construction is as follows: • Full Port or Conventional Port • Face to face according to ANSI/ASME B16.10 • Flanges according to ANSI/ASME B16.5 • Pressure seal bonnet • Outside Screw and Yoke (OS & Y) • Two piece self-aligning packing gland • Integral backseat • Integral body flanges • Butt Welded Ends to ANSI/ASME B16.25 • RTJ body bonnet gasket ring joint type • Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet 150Lb~600Lb (Flanged End Globe Valve) Standard Material Specifications Dimensions (mm) and Weights (Kg) 900~1500Lb (Flanged End Gate Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 900~2500Lb (Flanged End Pressure Seal Gate Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 150~600Lb (Flanged End Globe Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 900~1500Lb (Flanged End Globe Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 900~2500Lb (Flanged End Pressure-Seal Globe Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 150~600Lb (Flanged End Check Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 900~1500Lb (Flanged Steel Flange End Check Valve) Standard Material Specifications Note: Other materials are available upon request. Dimensions (mm) and Weights (Kg) 900~1500Lb (Flanged End Pressure-Seal Piston Check Valve) Standard Material Specifications Note: Other materials are available upon request.