Lifting and Lashing Points: Lifting and Lashing Points, Weld-on Type

About this product

TWN 0119 Weld-on type Lifting Points [spec table 1] The weld-on lifting points TWN 0119 are used for universal lifting, moving and lashing of loads. The lifting points are often welded to machine frames, steel structures, lifting beams and housings. The manufacturing and testing requirements are based on DIN EN 1677-1.

TWN 0124 Weld-on type Lifting Points with Spring [spec table 2] The weld-on lifting points with spring TWN 0124 are used for universal lifting, moving and lashing of loads. The lifting points are often welded onto machine frames, steel constructions, lifting beams and housings. The D-ring is being held in position by a spring. The manufacturing and testing requirements are based on DIN EN 1677-1.

TWN 0850/1 Weld-on Hooks [spec table 3] The weld-on hooks TWN 0850/1 are primarily welded to earth-moving machines, buckets, shovels and traverses for lifting, moving and securing loads. The forged safety latches prevent unintentional detachment from the load. The manufacturing and testing requirements are based on the DGUV testing principle GS-OA 15-03.

TWN 0850/2 Weld-on Hooks [spec table 4] The weld-on hooks TWN 0850/2 are primarily welded to earth-moving machines, buckets, shovels and traverses for lifting, moving and securing loads. The forged safety latches prevent unintentional detachment from the load. The manufacturing and testing requirements are based on the DGUV testing principle GS-OA 15-03.

TWN 1380 Weld-on Hooks [spec table 5] The weld-on hooks TWN 1380 are designed for lifting and moving loads and are mainly welded onto earth-moving machines, e.g. shovels. The weld-on hooks consist of a forged hook and a spring-loaded safety latch. They are painted yellow, the areas for the welds are bright. The design and construction are based on DIN EN 1677-1 as well as the DGUV testing principle GS-HM 35.

TWN 1471 ZK-Modules® with Stressless Lashing® [spec table 6] The weld-on ZK-modules® TWN 1471 are predominantly installed in C-shaped side frames of low-loaders and trailers. The large swivel range also allows the securing of overhanging loads. A newly developed, patented cassette design enables a fixed mounting position for easy connection to the lashing equipment. Stressless Lashing® in perfection. The manufacturing and testing requirements are based on DIN EN 1677-1.

TWN 1473 Lashing Points with two weld-on Brackets [spec table 7] The weld-on lashing points with two weld-on brackets TWN 1473 are used for lashing of loads. The lashing points are predominantly welded to the vehicle frame (semi-trailers, trailers). The manufacturing and testing requirements are based on DIN EN 1677-1, under consideration of higher lashing forces.

TWN 1477 ZKS-Modules [spec table 8] The weld-on ZKS-modules TWN 1477 are predominantly installed in side frames of low-loaders and trailers. The large swivel range also allows the securing of overhanging loads. The pivotable large lashing eyelet built into the cassette enables a fixed mounting position for easy connection with the lashing equipment. The manufacturing and testing requirements are based on the DIN EN 1677-1.

TWN 1479 Lashing Links [spec table 9] The Grade 80 lashing rings TWN 1479 are mainly fitted in brackets of C-shaped side frames on heavy-duty trailers. The crack tested lashing rings are used to secure loads in accordance with the DIN EN 12640 and DIN EN 12195-1 and enable the tie down of heavy loads of diverse shapes, such as construction equipments. The manufacturing and testing requirements are based on DIN EN 1677 Parts 1 and 4.

TWN 1480 RoRo Lashingpoints [spec table 10] The weldable forged RoRo Lashing Points TWN 1480 serve as attachment points or lashing points for securing road vehicles on RoRo cargo ships for transport at sea. The large 80 mm envelope circle of the lashing ring allows lashing with almost all common lashing devices. Integrated fixing springs in the weld-on bracket enables the lashing eye to be aligned before lashing. The manufacturing and testing requirements are based on DIN EN 1677-1 and DIN EN 29367-2.

TWN 1490 Lifting points THI-EYE, weld-on type [spec table 11] The weld-on type lifting points THI-EYE TWN 1490 are used for lifting, moving, and securing of loads, primarily to get welded onto earth-moving machines, shovels, grabs and traverses. The lifting points may be used with 100% WLL in all directions, are crack tested and feature angle indicators to optimize alignment during the rigging process. The manufacturing and testing requirements are based on the DGUV testing principal GS-HM 36 and the DIN EN 1677-1.

TWN 1872 Lifting Points with two Welding Brackets [spec table 12] The weld-on lifting points with two weld-on brackets TWN 1872 are used for lifting and moving of loads. The lifting points are predominantly welded on machine frames, steel constructions, traverses and housings. The manufacturing and testing requirements are based on the DIN EN 1677-1, under consideration of higher load capacities.

TWN 1880 COMPACT Lashing Points with Spring [spec table 13] The weld-on COMPACT lashing points with fixing springs TWN 1880 are used for securing of loads. The lashing points are predominantly welded in recessed skip fittings and on vehicle frames (semi-trailers, trailers). The compact design allows a small installation space. The manufacturing and testing requirements are based on the DIN EN 1677-1, under consideration of higher lashing forces.

TWN 1881 COMPACT Lashing Points without Spring [spec table 14] The weld-on COMPACT lashing points without fixing spring TWN 1881 are used for securing of loads. The lashing points are springless and have no painted components. They are therefore particularly suitable for hot-dip galvanizing together with the welded-on structure. The lashing points are predominantly welded in recessed skip fittings and on vehicle frames (semi-trailers, trailers). The compact design allows a small installation space. The manufacturing and testing requirements are based on the DIN EN 1677-1, under consideration of higher lashing forces.

TWN 1882 COMPACT Lifting Points with Spring [spec table 15] The weld-on COMPACT lifting points with fixing spring TWN 1882 are used for lifting and moving of loads. The lifting points are predominantly welded on machine frames, steel constructions, trusses and housings. The compact design allows a small installation space. The manufacturing and testing requirements are based on the DIN EN 1677-1, under consideration of higher load capacities.

About hoists, winches and lifting equipment

Hoists, winches, blocks, trolleys, clamps and magnets — equipment rather than rope or chain.