Preview images. Sign in for full-resolution photos.

Low Alloy

Elbor S P A Via Nazionale Arcella✓ Verified supplierItaly

🔒 45 specification tables, full-resolution photos and certificates are available to signed-in buyers.

About this product

ER-100: Ni-Mo-Cr low-alloyed solid wire suitable for welding in all positions, under protection of Ar/CO2 mixture, of steels with high resistance and fine-grained construction steels like type T1, N-AXTRA 55-60, WELDOX 630 or S 275, to S 550. Good resistance also to low temperatures down to -40°C. It is used to weld components for earthmoving machines, crane booms, etc. ER-110: Ni-Mo-Cr low-alloyed solid wire suitable for welding in all positions, under protection of Ar/CO2 mix, of steels with high resistance and fine-grained construction steels type T1, T1A, T1B, HY80, HY90, N-A-XTRA 55-60-65-70, WELDOX 700. Good resistance also to low temperatures down to -40°C. It is used to weld components for earthmoving machines, crane booms, etc. ELB-SG X96: Ni-Mo-Cr low-alloyed solid wire suitable for welding in all positions, under protection of Ar/CO2 mix, of steels with high resistance and fine-grained construction steels type T1, T1A, T1B, HY80, HY90, N-A-XTRA 55-60-65-70, WELDOX 700. Good resistance also to low temperatures down to -40°C. It is used to weld components for earthmoving machines, crane booms, etc. ER-70-SA1 (SGMO): Solid wire for welding 0 .5% Mo low-alloyed steels, resistant to hot ne-grained steels with high elastic limit, under protection of gas Ar/ CO2 mixture of Suitable for the construction of pressure vessels, pipes, submitted to operating temperatures up to 500°C. Good values of resilience at low temperatures. ER-80-SD2: MnMo solid wire (1,80 Mn; 0,5 Mo) used for construction when is required impact test up to -40° or good mechanical properties up to 500°; and for construction when is required minimum yeld strenght ≥500 N/mm2 ER-80-SNi1: Fine-grained low alloy steels and austempering steels. used to build cranes, tanks, industrial facilities, pipes. always recommended a pre-heating at 135°-165° CORTEN (ER80SG): Copper-plated low-alloyed solid wire to be used for welding under protection of gas Ar/ CO2 mixture, in all positions, of steels resistant to atmospheric corrosion, like CORTEN A, COR-TEN B, PATINAX, RESCO, ITACOR, etc. Excellent finisch surface finisch, excellent feeding in torches and excellent welding features. ELB CRMO1Si: For heat resistant steels. It grants good resistance to hydrogen and sulphured agents attack. Used for steam boilers, pressure tanks, pipelines, cranes, ground moving machines, presses, chemical and petrolchemical industry. ELB 70S2: Micro-alloyed steel, triple de-oxidized with Ti, Al, Zr suitable for the welding of C-Mn steels and low-alloy steels on greasy, oxidized surfaces destined to subsequent coating process also galvanic, with tensile strength ~ 580 N/ mm². Good also at low temperature. Tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval sector, petrolchemical sector, etc.