Chain slings grade 100 - VIP: Hooks and end fittings

About this product

Innovation and quality made by RUD: The highly dynamic chains and components of RUD product line VIP stand for up to 30 percent higher WLL than the highest grade 8 (grade 80) available until then. And with the same chains diameter. VIP-Chains are always one nominal thickness thinner – and therefore up to 50 percent lighter. The geometric structure and the tolerances of the VIP-Chains are adapted to those of the higher grade. The chain spectrum ranges from 4 to 28 mm and from 0.63 t (MINI single-strand) to 126 t (2 x MAXI double-strand).

VIP-COBRA hook VIP-COBRA hook with safety latch. - Extremely robust, further improved version. - No protruding hook tip. - Forged, tempered safety latch snaps into the tip of the hook, thus protecting against lateral bending. - Triple coiled, stainless double jaw spring. - Thickened hook tip prevents incorrect use. - Wear occurrence edges on both sides.

VIP-Self locking hook VIP-Self-locking hook. - Weight optimised due to innovative structure design (Skeletto). - Ergonomically designed locking lever, user-friendly and with non-slip surface – no danger of crushing. - Wear occurrence ribs – to protect the first chain link. - Thickened hook tip – prevents dangerous hook tip WLL. - Marking points to check the size of the jaw width!

VIP-Foundry hook VIP-Foundry hook. - Also referred to as foundry or container hooks. - With much larger jaws like VCGH, but without safety element. - Weight optimised by Skeletto design. - Robust cross-section (dimension C/G) against higher bending forces. - Chains protection and wear occurrence edges dimension “E”. - Complete with connection bolts and clamp pin pre-assembled. - Marking points to check the size of the jaw width!

VIP-Cobra Eye sling hook for PowerPoint VIP-COBRA-eye hook with safety latch. - For special wire ropes, VIP-Chain suspensions, PowerPoint combinations or universal swivels. - Extremely robust, compact version. - No protruding hook tip - Forged, tempered safety latch snaps into the tip of the hook, thus protecting against lateral bending. - Wear occurrence edges on both sides. - Triple coiled, stainless double jaw spring. - Thickened hook tip prevents incorrect use.

VIP-End link VIP-End links with welded-in connectors. - VIP-End link VA-1 / VB-1 with an all direction movable welded VRG connector, thus ensuring that only the correct chain diameter and number of strands can be connected. VSAK-Special master links can be used for this but without VIP-KZA identification tag. - The VIP-load and retaining pins are preassembled.

VIP-Clevis shackle with clamp lock The first ever VIP clickable clevis shackle. From RUD. - Real time savings: up to 80 % faster mounting and dismounting. - Easiest tool-free handling: without bolts, nuts or cotter pins. - Exceptional safety: automatic securing of the shackle pin. - Prevents incorrect bolt mounting. - Very high durability versus conventional shackles. - Can also replace a hook.

VIP-MINI coupling shackle VIP non-interchangeable mini coupling shackle - Optimum adjustment - maximum jaw width with the smallest shackle pins. - High-strength design with integrated safety thread in the shackle shackle. Smooth pin support in the shackle on both sides. Bolt can be rotated. - No bending stress in the thread, only locking function. - Pre-assembled with clamping sleeve. Long-term locking by driving in a clamping sleeve. Special thread, therefore no confusion with other shackle bolts!

VIP-Connector VIP-Clevis connector. - As individual part for external connections to clevis connections, flanges, etc. - Complete with VIP-Connecting bolts and clamping sleeve pre-assembled.

VIP-Bale hook VIP-Bale hook. - Lateral flattenings at the hook allow an easy insertion into structural steel meshes. Direct chain connection with a fool-proof clevis section and the integrated swivel with a ball bearing ensure untwisting of chain. - Only bundled structural steel meshes must be transported. - Do not lift at strapping or lacing. - Not suitable for transport above persons. When structural steel mesh bale hooks hooks, increased caution must be exercised or a risk assessment must be carried out before use.

VIP-Shackle foolproof VIP-Fool-proof shackle. - High-strength design with integrated safety thread in the shackles bar. Smooth bolt support in the shackle on both sides. Bolts rotatable. - No bending stress in the thread, but securing function only. - Pre-assembled with clamping sleeve. Long-term security by driving in a clamping sleeve. Special thread, therefore non-mix-up with other shackles bolts!

VIP-Shackle VIP-Shackle high-tensile. - Shape according to DIN 82 101-C with attached captive nut. Lock via plug-in splint.

VIP-Plug in connector VIP-Plug-in connector. - VERG – for use as a push-in bolt for tool transport or similar lifting methods. In all the places, where only drilled holes are possible to take the load. - Minimum Ø D see table, minimum bolt length L is 2 x D. Maximum Ø D = 48 mm. - Drilled hole diameter = D + 1 mm. Recommended in connection with a spreader bar or cross beam for vertical lifting.

VIP-Container hook VCH-12,5t VIP-Container hook – 12.5 t. - To suit ISO container corners. - Permanent connection using VVS or VV-GSCH. - Separate component for hook suspension.

VIP-Container hook VCH-K-16 VIP-Container hook – 10 t. - To suit ISO container corners. - The container hook is equipped with a safety lock. - It is no longer possible to fall out of the ISO corner when lifting. Simplest handling. - Insertion: Swing safety latch back, insert container hook in ISO corner, release safety latch. Locks automatically. - Removal: Swing safety latch back, remove container hook from ISO corner, release safety latch.

VIP-Container hook VCH-SL-22 VIP-Container hook – 20 t. - To suit ISO container corners. - The container hook is equipped with a patented safety lock. - It is no longer possible to fall out of the ISO corner when lifting. Simplest handling. - Insertion: By automatic opening and closing without actuating the safety lock. - Removal: Only possible with the release bolt actuated. - VCH-SL-22 to suit ISO container corner. Clevis connection for size 22 VIP-Chain. - With a VRG-16 reduction, the VIP-Chain 16 can be used.

About lifting and hoist chain

Grade 80, 100 and higher alloy chain and chain slings rated for overhead lifting.