Chain slings grade 100 - VIP: Shortening elements

About this product

Innovation and quality made by RUD: The highly dynamic chains and components of RUD product line VIP stand for up to 30 percent higher WLL than the highest grade 8 (grade 80) available until then. And with the same chains diameter. VIP-Chains are always one nominal thickness thinner – and therefore up to 50 percent lighter. The geometric structure and the tolerances of the VIP-Chains are adapted to those of the higher grade. The chain spectrum ranges from 4 to 28 mm and from 0.63 t (MINI single-strand) to 126 t (2 x MAXI double-strand).

VIP-Multi shortening claw VMVK VIP-Multi-shortening claw. - Further development of the RUD shortening claw, which has been tried and tested for decades. - Captive installed in the continuous chain strand. - Can be mounted at any position on the chain strand, or moved on the chain. - No additional chain and coupling part required. - Ideal support of the chain by the link-shaped bag support – meaning no reduction of WLL. - The robust, spring-mounted safety bolt prevents the suspended chains from loosening automatically when unloaded or under WLL. - Complies with DIN 5692. - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - DNV-approved. This product is suitable for marine and offshore applications. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

VIP-Shortening claw VV VIP-Shortening claw. - For VIP chain 20, 22 and 28 mm is only the standard shortening claw in VIP- Quality grade is available. - Ideal support of the chain by the link-shaped bag support – meaning no reduction of WLL. - Lightweight design. - The robust, spring-mounted safety bolt prevents the suspended chain from loosening automatically when unloaded or under load. - Complies with DIN 5692. - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - DNV-approved. This product is suitable for marine and offshore applications. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

VIP-Shortening hook VIP-Shortening hook. - No reduction of VIP-WLL. - Angled insertion opening makes it difficult for the loose chain to slide out. - Widened hook tip to prevent improper use, e. g. incorrect attachment of the chain. - Corresponding with norm DIN 5692. Chains groove depth > 5 x chains nominal thickness. - Complete with connection bolts and clamp pin pre-assembled. - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

About lifting and hoist chain

Grade 80, 100 and higher alloy chain and chain slings rated for overhead lifting.