Chain slings grade 120 - ICE: Hooks and end fittings

About this product

RUD has always been ahead of its time when it comes to materials for lifting means. One example is the world-famous RUD ICE-Chain, which can replace a grade 8 chain of the next largest nominal thickness. Thanks to the extremely high strength of the patented material, the continuous nominal thickness increase has been achieved even with diameters of less than 16 mm. The decisive advantage: An ICE-Lifting mean or lashing chain is more than 30 percent lighter and the working ergonomics are noticeably improved.

ICE-STAR hook ISH ICE-STAR hook. - Innovative structured design, finite elements up to 25 % lighter than hooks of grade 8 with the same WLL, i. e. the next largest nominal chain thickness. - Large jaw opening as with the granite super hook, proven a million times over – the next largest nominal thickness – no skimping! - Protective edges – on the sides and on top for folding protection. - Wear occurrence ribs – to protect the first chain link. - No protruding hook tip (no hooking). - Thickened hook tip – prevents dangerous hook tip WLL. - Drop-forged, tempered, ergonomically designed folding safety device and protected, stainless, triple-wound long-term double leg spring. Here the standard values for lateral load capacity are exceeded many times over. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-Self locking hook IAGH ICE-Clevis self locking hook. - Innovative lightweight construction, thus up to 30 % lighter than automatic hooks of grade 8 with the same WLL, i. e. the next largest nominal chain thickness. - Large jaw opening as with grade 80 hooks of the next larger nominal chain size – no skimping! - Ergonomically designed locking lever, user-friendly and with non-slip surface – no danger of crushing. - Wear occurrence ribs – to protect the first chain link. - Thickened hook tip – prevents dangerous hook tip WLL. - Marking points to check the size of the jaw width! - Wear occurrence marks which indicate the legally required discard criteria without measuring. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-Foundry hook IWH ICE-Foundry hook. - Also referred to as foundry or container hook. - Weight optimised by Skeletto design. - With non-mix-up clevis connection. - Robust cross-section (dimension C and G) against higher bending forces. - Protection and wear occurrence edges (dimension E). - Wear occurrence marks in the hook base. - Only use where unintentional removal is not possible (risk assessment)! Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-Self locking hook for skip dumpers ICE-Clevis self locking hook for dumper trucks. - Innovative lightweight construction, thus up to 30 % lighter than automatic hooks of grade 8 with the same WLL, i. e. the next largest nominal chain size. - Large jaw opening as with grade 80 hooks of the next larger nominal thickness – no skimping! - Ergonomically designed locking lever, user-friendly and with non-slip surface – no danger of crushing. - Wear occurrence ribs – to protect the first chain link. - Thickened hook tip – prevents dangerous hook tip WLL. - Wear occurrence marks which indicate the legally required discard criteria without measuring. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-Dumper truck suspension-ring ICE-Dumper truck suspension-ring. - Fast, robust and user-friendly. - Quick attachment, without separate unlatching. - Simplified mounting and dismounting of the recess link through ergonomically designed locking latch. - Locking latch with anti-slip shaping. - Protective ribs protect the locking latch from damage and impact. - To suit shaped recess pins according to DIN/EN 30720. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-End links IA-RG ICE-End links with welded-in connectors. - ICE-End link IA-RG 1 with an all direction movable welded IRG connector, thus ensuring that only the correct chain diameter and number of strands can be connected. ISAK-Special master links can be used for this but without ICE-KZA identification tag. - The ICE-load and retaining pins are preassembled. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-End links IB-RG ICE-End links with welded-in connectors. - ICE-End link IB-RG 1 with an all direction movable welded IRG connector, thus ensuring that only the correct chain diameter and number of strands can be connected. - The ICE-load and retaining pins are preassembled. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

ICE-Clevis shackle with clamp lock The first ever ICE clickable clevis shackle. From RUD. - Real time savings: up to 80 % faster mounting and dismounting.* - Easiest tool-free handling: without bolts, nuts or cotter pins. - Exceptional safety: automatic securing of the shackle pin. - Prevents incorrect bolt mounting. - Very high durability versus conventional shackles. - Can also replace a hook. *Compared to standard clevis shackles. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip). - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction.

ICE-Connector IRG ICE-Clevis connector. - As individual part for external connections to clevis connections, flanges, etc. - Complete with ICE-Connecting bolts and clamping sleeve pre-assembled. Pictograms on the product page: - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction. - Component has been approved by the DGUV (German Social Accident Insurance) and has the corresponding certificate. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

About lifting and hoist chain

Grade 80, 100 and higher alloy chain and chain slings rated for overhead lifting.