Lifting accessories

About this product

ICE-Connecting bolt and tensioning sleeve - available only in box quantity ICE-SPARE BOLTS WITH SAFETY PIN - Only available as a pack of 10. - Non-mix-up with RUD assembly bolts of other grades. - Only available as a packing unit. - 1 Safety factor (e. g. 4:1) for lifting means (safety against breakage). - All load-bearing elements are 100 % electromagnetically crack-tested. - Operating temperature range of the lifting means without permanent reduction of load capacity. - Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction.

Safety set ISH ICE-SPARE LATCH FOR ISH - Consisting of forged safety latch, triple coiled stainless steel double leg spring and safety pin. - Only available as a complete set. - Simple assembly/removal with a hammer and drift punch.

ICE-Spare part set for self looking hook ICE-SAFETY ELEMENTS AUTOMATIC HOOK - Consisting of: 1 locking lever 1 spring 2 clamping sleeves

ICE-Spare part set for Dumper truck suspension-ring IMEG ICE-SECURING ELEMENTS FOR RECESS SUSPENSION LINK IMEG - Consisting of: 1 locking lever 1 spring 2 clamping sleeves

ICE-Spare part set for IVS ICE-SAFETY ELEMENTS IVS - Spare part set for VIP- and ICE-Connecting link consisting of: 1 bolt 2 clamping sleeves

ICE-Identification tag Identification tag. ICE identification tag with an integrated chain testing gauge, complete with a fastening chain. The following chain characteristics can be tested with the gauge: - Wear of nominal diameter. - Pitch elongation (caused by wear of nominal diameter) - Plastic elongation caused by overloading.

Test data tag PDA ICE-PDA TEST DATA TAG - Test data tag for permanent marking of the test intervals according to DGUV rule 109-017.

Endless chains identification tag ENDLESS CHAINS IDENTIFICATION TAG - Grade-neutral identification tag for endless chains.

Clamp lock spare parts set for CCS-FASTLOX Clamp lock spare parts set for CCS-FASTLOX Spare parts set for pliers lock consisting of: - 2x lever - 1x torsion spring - 1x screw with shoulder

VIP-G-bolt set - available only in box quantity - VIP-SPARE BOLTS WITH SAFETY CLAMPING SLEEVE - VIP-Clevis connection bolts for connecting the clevis connection components to the chains. Stamped with the nominal size and grade, stainless safety clamping sleeve for assembly/securing in components. - Only available as packing units.

VIP-Spare part set cobra hook - springs are available only in box quantity - VIP-SAFETY ELEMENTS COBRA CLEVIS CONNECTION HOOKS - Consisting of forged safety latch, triple coiled stainless steel double leg spring and safety pin. - Only available as a complete set. - Simple assembly/removal with a hammer and driver.

VIP-Springs cobra hook - are available only in box quantity VIP-SPRINGS COBRA HOOK - Triple coiled stainless steel double leg spring for RUD-safety latch

VIP-Spare part set for Self looking hook VIP-SAFETY ELEMENTS AUTOMATIC HOOK - Spare part set for VIP-Automatic clevis connection hooks consisting of: 1 locking lever 1 spring 2 clamping sleeves

VIP-Spare part set for VMVK, VV and VML VIP-SAFETY ELEMENTS VMVK, VV AND VML - Spare part set for VMVK consisting of: 1 safety bolt 1 pressure spring 1 clamping sleeve (for assembly of the safety bolt) 1 clamping sleeve, long (for chains lock in the slot)

VIP-Spare part set for VVS VIP-SAFETY ELEMENTS VVS - Spare part set for VIP- and ICE-Connection links consisting of: 1 bolt 2 clamping sleeves

VIP-Safety set for VMEG VIP-SPARE PART SET FOR VMEG - Spare part set for ICE- / VIP-Recess suspension link consisting of: 1 locking lever 1 spring 2 clamping sleeves

VIP-Identification tag VIP-Identification tag. VIP identification tag with an integrated chain testing gauge, complete with a fastening chain. The following chain characteristics can be tested with the gauge: - Wear of nominal diameter. - Pitch elongation (caused by wear of nominal diameter) - Plastic elongation caused by overloading.

VIP-Chain testing gauge VIP-Chain testing gauge VIP identification disc with an integrated chain testing gauge. The following chain characteristics can be tested with the gauge: - Wear of nominal diameter. - Pitch elongation (caused by wear of nominal diameter) - Plastic elongation caused by overloading.

Clamp lock spare parts set for VIP CCS-FASTLOX Clamp lock spare parts set for CCS-FASTLOX Spare parts set for pliers lock consisting of: - 2x lever - 1x torsion spring - 1x screw with shoulder

Grade 80 Identification tag With single and multistrand symbols, without diameter and loading capacity information, complete with wire rope connection and alu grommet, colored red. Stamps according to load capacity information EN 818-4.

Edge protection RSK EDGE PROTECTION RSK - RUD RSK system made of hard-wearing edge-resistant polyurethane. - Flexible in all directions. Can be moved manually on the chains. Even load distribution by diagonal chains crossover. Available in lengths 1 m and 2 m.

Testing Gauge for Sling Chains Grade 80 - Compulsory testing becomes child's play - without calipers, without tables and calculations - Checks elongation due to overload ( > 5% ) - Checks elongation due to wear in the joint ( > 5% ) - Only attachable, can also be tested under load - Robust design with storage bag - One gauge for all RUD-EN 818-2 chains ND 4/6/8/10/13/16/18/22

About lifting and hoist chain

Grade 80, 100 and higher alloy chain and chain slings rated for overhead lifting.