Lifting and hoist chain

RUD lashing chains

RUD lashing equipment for faster attachment and greater safety.; ICE-Lashing Chain-Classic; Lashing chains with ratchet tensioner; ICE lashing chain with loose chain strand and ICE - CURT - GAKO clamps with both sides mounted shortening…

🔒 2 specification tables, full-resolution photos and certificates are available to signed-in buyers.

About this product

RUD lashing equipment for faster attachment and greater safety.

ICE-Lashing Chain-Classic Lashing chains with ratchet tensioner ICE lashing chain with loose chain strand and ICE - CURT - GAKO clamps with both sides mounted shortening hook . Length: 3500 mm. Please observe DIN EN 12 195-3, and VDI 2700 ICE-VSK Lashing chains must not be used for lifting loads. Hooks and tensioners should not beloaded while positioned at corners. When "sharp edges" occur ( if the radius of the work piece is smaller than the diameter of the lashing chain) please use edge protection devices or reduce the lashing capacity (LC) by 20%. Pictograms on the product page: - Clear indication of the minimum lashing capacity in daN. - Design factor (e. g. 2:1) for lashing means (safety against breakage). - Operating temperature range of the lifting means without permanent reduction of load capacity. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip). - All load-bearing elements are 100 % electromagnetically crack-tested.

ICE-Lashing Chain-Ergo ICE-Lashing chain - Standard with a captive on the chainstrand assembled ICE-ratchet tensioner, combined with quick connection ICE-CURT-SL. Fast pretensioning and shortening. Significant weight reduction compared to Grade 80 lashing chains and improved handling. Length: 3.500 mm Pictograms on the product page: - Clear indication of the minimum lashing capacity in daN. - Design factor (e. g. 2:1) for lashing means (safety against breakage). - Operating temperature range of the lifting means without permanent reduction of load capacity. - Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip). - All load-bearing elements are 100 % electromagnetically crack-tested.

About lifting and hoist chain

Grade 80, 100 and higher alloy chain and chain slings rated for overhead lifting.