Accessories

About this product

Accessories for Lifting and Lashing

Special Thimble Not all rope end terminations achieve 100% of the rope’s breaking strength. Please refer to the attached reduction factors for the various end fittings. - 100% – Cast Socket (Resin Termination) - 90% – Flemish Eye with Steel Ferrule - 90% – Talurit® Pressed Termination - 85% – Wire Rope Clip - 80% – Wedge Socket Features: - DIN 6899 Type BF - Galvanized - May only be used in exceptional cases (does not comply with EN 13411-1) - Lightweight sheet metal thimble with particularly large internal width - For ropes from 5 to 32 mm

High-Strength Shackle Type HC2 Features: - Bow shackle with screw pin, nut, and cotter pin - Pin painted - Working load limit, nominal size, and CE marking stamped (Safety Factor 5) - Working load limit: 2,000 – 35,000 kg

High-Strength Shackle Type HA2 Features: - Bow Shackle with Screw Pin - Pin painted - Working load limit, nominal size, and CE marking stamped (Safety Factor 5) - Working load limit: 500 – 35,000 kg

Sika Hook Type OHS Features: - Galvanized safety latch - Robust design (Safety Factor 4) - Rated load capacity: 1,500 – 12,500 kg

CLW Safety Load Hook Features: - Safety load hook CLW must only be loaded in a straight pull - Hooks with brass plain bearings must not be rotated under load - Rated load capacity: 1,120 – 12,500 kg

CLS Safety Hook Features: - Rated load capacity: 1,120 – 15,000 kg

S-Hook SH and SH-Eye Features: - S-Hook SH = open - S-Hook SH-E = with eye - Rated load capacity: 200 – 6,000 kg

S-Hook 1700 + 1710 Long Version Features: - S-Hook 1700 = open - S-Hook 1710 = with eye - Rated load capacity: 100 – 3,200 kg

Wire Rope Tension Clamp Features: - Galvanized - Clamping jaws blued - Nominal size: 4 – 10 mm with round eye - Nominal size: 16 – 38 mm with oval eye

High-Strength Shackle Type HC1 Features: - Straight shackle with screw pin, nut, and cotter pin - Pin painted - Working load limit, nominal size, and CE marking stamped (Safety Factor 5) - Working load limit: 2,000 – 35,000 kg

High-Strength Shackle Type HA1 Features: - Straight Shackle with Screw Pin - Pin painted - Working load limit, nominal size, and CE marking stamped (Safety Factor 5) - Working load limit: 750 – 35,000 kg

Cable Pulling Socks Two designs: - Open on both ends (KV), not suitable for pulling overhead line ropes, working load: 2.2 – 8.1 kN - Thimble on one end – open on the other (K), working load: 3.4 – 11.7 kN Features: - two possible designs

Swivel 2 Type D2 Features: - Insulated - Ball bearing - Rated load capacity: 2,000 – 12,500 kg

Swivel 1 Type D1 Features: - Insulated - Ball bearing - Rated load capacity: 2,000 – 12,500 kg

Lifting point for welding on Features: - WLL: 1.12 - 15.0 t

About rigging hardware and fittings

Shackles, hooks, thimbles, clips, sockets, turnbuckles, swivels and other rope and chain fittings.