Lifting gear and points

About this product

Swivel Bracket Bolt-on, rotatable lifting point for hoisting heavy loads that need to be turned or rotated. The swivel shackle can be aligned under load. WLL: 0.3 – 40.0 t Warning: Not suitable for continuous rotation under load! Features: - 4:1 Safety Factor in All Load Directions - Designed, Tested, and Certified According to GS-OA 15-04 – EN 1677 - Suitable for Safe Lifting of Loads in Compliance with Machinery Directive 2006/42/EC - 100% Magnaflux Crack-Tested - Engineered for 20,000 Load Cycles - Custom Threads and Shaft Lengths Available Upon Request - 360° Rotatable – Eye Swivels 180° for Self-Alignment - Equipped with Ball Bearings for Easier Load Orientation - Axial Load Tolerance of ±5° with a 10% Reduction in Load Capacity Permissible

HQ Eye Bolt Lifting point for hoisting loads WLL: 1.0 – 32.0 t Warning: Not suitable for rotating under load! Features: - 4:1 safety factor in all load directions - Designed, tested, and certified according to GS-OA 15-04 – EN 1677 - Suitable for the safe lifting of loads in accordance with Machinery Directive 2006/42/EC - 360° rotatable - 100% Magnaflux crack-tested - Designed for up to 20,000 load cycles - Ideal as a 90° lifting point - Captive bolt - For axial loading, a deviation of +/-5° is permissible with a 10% reduction in load capacity

Weld-On Lifting Ring with Double Base Weld-on lifting bracket for hoisting loads with a compact lifting point. WLL: 4.0 – 30.0 t Warning: Not to be used for lifting people! Features: - The weld-on bracket must be continuously welded around its perimeter, except in the drainage area. - In the case of an asymmetrical load, the load capacity of the lifting ring must be reduced according to the values specified in the table for different lifting configurations. - The shackle must always be aligned with the direction of pull, with a permissible tolerance of +/-10°. - The lifting point features a safety factor of 4. The lifting ring is 100% crack-tested, made of high-strength steel, and coated with epoxy resin. - It is designed for up to 20,000 load cycles.

Weld-On Lifting Ring with Single Base Mounting bracket for lifting loads with minimal space requirements. WLL: 1.5 – 16.0 t Warning: Not to be used for lifting people! Features: - In the case of an asymmetrical load, the load capacity of the lifting ring must be reduced according to the values specified in the table for different lifting methods. - The shackle must always be aligned with the direction of pull (permissible tolerance: +/-10°). - Guaranteed safe lifting for up to 20,000 load cycles. - Safety factor 4 - 100% crack-tested lifting ring - Made of high-strength steel - Epoxy-coated - Designed for 20,000 load cyclesn

HQE Eye Nut with Integrated Safety Lock Lifting point for hoisting loads, suitable for use with threaded bolts and/or screws. WLL: 1.0 – 12.0 t Warning: Not suitable for rotating under load! Features: - 4:1 safety factor in all load directions - Designed, tested, and certified according to GS-OA 15-04 - EN 1677 - Suitable for safe lifting of loads in compliance with Machinery Directive 2006/42/EC - 360° rotatable - 100% Magnaflux crack-tested - Rated for 20,000 load cycles - Captive nut (non-detachable) - Mountable using a star key - For axial loading, a deviation of +/-5° is permissible with a 10% reduction in load capacity - The lifting eye nut must be fully threaded onto the bolt

Ring Assembly according to EN 1667-4 Features: - For three- and four-leg wire rope slings according to EN 13414-1 - Working load limit stamped - Rated capacity: 2,000 – 20,000 kg

Bracket Bolt-On Ring Features: - WLL: 30.0 - 50.0 t

Master Link Oval Features: - Oval Master Link without Flattening according to EN 13414-1 for Wire Rope Slings - Single- and Two-leg Slings conform to EN 1677-4 (Safety Factor 4) - Rated Load Capacity: 2,500 – 25,000 kg

Load Block Load direction 90° with minimal space requirement. Lifting point for hoisting loads. In accordance with DGUV requirements, the lifting point must be used with the supplied bolt. If the bolt is replaced, Stamperia Carcano S.p.A. declines all liability and warranty. WLL: 0.3 – 20.0 t Warning: Lifting point not suitable for rotating under load! Features: - 4:1 safety factor in all load directions - Designed, tested, and certified according to GS-OA 15-04 – EN 1677 - Suitable for safe lifting of loads in accordance with Machinery Directive 2006/42/EC - 360° rotatable - 100% Magnaflux crack-tested - Designed for 20,000 load cycles - Bolt permanently corrosion-protected with GEOMET coating - Special threads and custom shaft lengths available on request - Ideal as a 90° lifting point - Captive bolt - Lifting eye bolts with nominal diameter M36 or larger can also be tightened using standard hex keys

Lashing Ring with Single Weld Base Weld-on lifting lug for attaching loads where space is limited. WLL: 3,000 – 32,000 daN Warning: Not to be used for lifting loads and/or people! Features: - Safety factor 2 - 100% crack-tested lifting ring - Standards to be observed when selecting and installing the lifting lug: EN 12640 – EN 75410 – EN 12195/1

Hook for welding on Features: - WLL: 1.12 - 10.0 t

Swivel Lifting Point with Joint Variant 1 Lifting point for handling loads. Minimal space requirement in the load direction with 5:1 safety factor. The lifting swivel must be used with the supplied bolt. If the bolt is replaced, Stamperia Carcano S.p.A. declines all liability and warranty. WLL: 0.3 – 6.3 t Warning: Lifting point not suitable for rotating under load! Features: - 5:1 safety factor in all load directions - Suitable for safe lifting of loads in accordance with Machinery Directive 2006/42/EC - 360° rotatable - 100% Magnaflux crack-tested - Designed for 20,000 load cycles - Bolt permanently corrosion-protected with GEOMET - Ideal as a 90° lifting point - Captive bolt - Lifting eye bolts can also be fastened with standard hex keys

About rigging hardware and fittings

Shackles, hooks, thimbles, clips, sockets, turnbuckles, swivels and other rope and chain fittings.